Mini Bike Inflator – Portable Electric 120PSI Tire Pump with Digital Gauge
A pocket-size 120PSI mini bike inflator with digital gauge, built for cyclists who need fast, reliable inflation on the road, trail, or commute. ABS + metal construction, 40W motor, and dual 500mAh batteries deliver road-bike-class performance in a body small enough to fit in a saddle bag.
BaseInfo
- Brand: AnttifySport
- Product Origin: CHINA
- Max Pressure: 120 PSI
- Power: 40W motor
- Battery: 2 x 500mAh rechargeable
- Meterial: ABS + Metal
- Display: Digital pressure gauge
- SKU: AS-CA-0048
Key attributes
| Dimensions | 4.5 × 3.3 × 7.18 cm (1.77 × 1.30 × 2.83 in) |
| Weight | 108g(gw) |
| Max Pressure | 120 PSI |
| Pressure Range | 2 – 120 PSI |
| Display | Digital pressure gauge |
| Motor | Brushless motor |
| Valves | Presta & Schrader (2 adapters included) |
| Inflation Time | ~80 sec for 700×23C road tire |
| Color | Custom color runs available (MOQ applies) |
Two Similar Pumps and How to Merchandise Them
The AS-CA-0048 is a 108 g brushless-motor electric pump at 4.5 x 3.3 x 7.18 cm, reaching 120 PSI across a 2-120 PSI range with a digital pressure gauge. It sits alongside the 105 g AS-CA-0047 in the AnttifySport range, and the two are close enough that a buyer should be careful about how they are presented. A 3 g weight difference and a 1.8 cm length difference are not customer-facing differentiators, and listing both without a real distinction between them creates a range in which the customer cannot tell which to buy and defaults to the cheaper one.
Two approaches work. The first is to stock one and drop the other, which is simpler and honest given how similar they are. The second is to ask the sourcing desk for the flow rate, battery capacity, and charge time of each, and then position them on a real axis: if one inflates a 700 x 25 tyre in 90 seconds and the other in 140, that is a difference a mountain bike customer will feel and a road customer will not. Both reach the same 120 PSI, so pressure is not a distinguishing axis, and a buyer should not manufacture one. Below 150 PSI there is no practical difference in what a customer can inflate, which is what makes flow rate the only figure worth comparing on a product page for this class.
Request a Quote
Ask the sourcing desk for current pricing, carton specification, and the production schedule on the AS-CA-0048 108 g mini inflator. Share your target market, annual volume, and any branding requirement in the form below and we return a quotation with the relevant spec sheet.
The AS-CA-0048 carries a 50-piece MOQ with logo customisation available from the same minimum. At 108 g and 4.5 x 3.3 x 7.18 cm it is 3 g heavier and 1.8 cm longer than the 105 g AS-CA-0047, and both reach the same 120 PSI with a digital gauge. A buyer stocking both should know the difference is small and should be honest about it in the copy rather than presenting them as different products: the practical argument is that one has a slightly larger body for a marginally better battery or motor, and the buyer should ask the sourcing desk for the flow rate and battery capacity of each before choosing which to lead with. One is a digital pressure gauge, the other an LED gauge; both are legible in daylight.
